Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) | |
| With engine stopped | 10 (0.4) or less | - | ||
| Steering angle | Inside wheel | 31°48' +/- 2°00' | - | |
| Outside wheel (reference) | 27°06' | - | ||
| Toe-in mm (in) | 0 +/- 3 (0 +/- 0.12) | - | ||
| Tie rod end ball joint breakaway torque N.m (in-lb) | 0.5 - 3.5 (4.4 - 31.0) | - | ||
| Tie rod swing resistance N (lb) [Tie rod swing torque N.m (in-lb)] | 3.6 - 17.6 (0.81 - 3.96) [1.0 - 4.9 (8.9 - 43.3)] |
- | ||
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 35 (7.9) or less [5.9 (1.33) or less] |
- | ||
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 8.3 - 8.8 (1,204 - 1,276) < 2.4L engine > 9.3 - 9.8 (1,349 - 1,421) < 3.8L engine > |
- | |
| Pressure under no-load conditions | 0.8 - 1.0 (116 - 145) | - | ||
| Steering gear retention hydraulic pressure | 8.3 - 8.8 (1,204 - 1,276) < 2.4L engine > 9.3 - 9.8 (1,349 - 1,421) < 3.8L engine > |
- | ||
| Oil pressure switch operating pressure MPa (psi) | OFF --> ON | 1.8 - 2.4 (261 - 348) | - | |
| ON --> OFF | 0.8 - 1.4 (116 - 203) | - | ||
| Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | 0.8 - 1.9 (7.1 - 16.8) [0.7 (6.2) or less] |
- | ||
| Opening dimension of special tool MB991561 mm (in) | 1.9 (0.07) | - | ||
| Band crimped width mm (in) | 1.4 - 1.8 (0.06 - 0.07) | - | ||