Enabling/Disabling the Hazard Answerback Function

ENABLING/DISABLING THE HAZARD ANSWERBACK FUNCTION

HOW TO ADJUST HAZARD ANSWERBACK WHEN THE TRANSMITTER IS USED TO LOCK DOORS
1. Remove the ignition key.
2. Press the "unlock" button for 4 to 10 seconds and press the "lock" button during this time.
3. Release the "lock" button and then release the "unlock" button within 10 seconds of pressing the "lock" button in STEP 2. The ETACS-ECU tone alarm will sound, indicating that the hazard answerback function can be enabled or disabled when the doors are locked.
- Enable the hazard answerback function when the doors are locked: The ETACS-ECU tone alarm will sound once.
- Disable the hazard answerback function when the doors are locked: The ETACS-ECU tone alarm will sound twice.

HOW TO ADJUST HAZARD ANSWERBACK WHEN THE TRANSMITTER IS USED TO UNLOCK DOORS
1. Remove the ignition key.
2. Press the "unlock" button for 4 to 10 seconds and press the "lock" button during this time.
3. Release the "unlock" button and then release the "lock" button within 10 seconds of pressing the "lock" button in STEP 2. The ETACS-ECU tone alarm will sound, indicating that the hazard answerback function can be enabled or disabled when the door are unlocked.
- Enable the hazard answerback function when the doors are unlocked: The ETACS-ECU tone alarm will sound once.
- Disable the hazard answerback function when the doors are unlocked: The ETACS-ECU tone alarm will sound twice.