LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Endeavor Limited, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Traction Control System >> On-Vehicle Service >> TCL Switch Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCL Switch Check

  1. Remove the TCL switch. (Refer to TCL SWITCH  ).
  2. Measure the resistance between terminal 1 and terminal 2 when the TCL switch is pressed or released. If the values measured at the time correspond to those in the table below, the resistance values are correct.
    TESTER CONNECTION SPECIFIED CONDITION

    SWITCH POSITION TESTER CONNECTION SPECIFIED CONDITION
    Pressed 1-2 Less than 2 ohms
    Released 1-2 Open circuit
    Fig 1: Connecting Scan Tool To Data Link Connector
    G04231129Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.