Data List Reference Table
The following items can be read by the scan tool from the ABS/TCL-ECU input data. (Refer to DIAGNOSIS FUNCTION ).
DATA LIST REFERENCE
| M.U.T.-III SCAN TOOL DISPLAY | ITEM NO. | CHECK ITEM | CHECKING REQUIREMENTS | NORMAL VALUE |
|---|---|---|---|---|
| FR wheel speed sensor | 01 | Front right wheel speed sensor | Drive the vehicle | Vehicle speeds displayed on the speedometer and scan tool are identical. |
| FL wheel speed sensor | 02 | Front left wheel speed sensor | ||
| RR wheel speed sensor | 03 | Rear right wheel speed sensor | ||
| RL wheel speed sensor | 04 | Rear left wheel speed sensor | ||
| Battery voltage | 05 | ABS/TCL-ECU power supply voltage | Ignition switch power supply voltage | Battery positive voltage |
| Stoplight switch* | 06 | Stoplight switch | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| TCL mode | 35 | TCL operation | When the TCL outputs the operation permission signal during driving | ON |
| When the TCL outputs the operation inhibition signal during driving | OFF |
NOTE:
Since the TCL is controlled with the same ABS/TCL-ECU used to control the ABS, the stoplight switch check item (No.6) used only for the ABS also appear.