Theft Protection

In order to protect against theft, a Vehicle Identification Number (VIN) is attached as a plate or label to the following major parts of the engine and transaxle, as well as main outer panels: Engine cylinder block, Transaxle housing, Fender, Doors, Trunk lid, Rear quarter outer panel, Hood, Bumpers In addition, a theft-protection label is attached to replacement parts for the body outer panel main components, and the same data is stamped into replacement parts for the engine and the transaxle.

CAUTION: Cautions regarding panel repairs:

When repainting original parts, do so after first masking the theft-protection label. After painting, be sure to peel off the masking tape.
The theft-protection label for replacement parts is covered by masking tape, so such parts can be painted as is. The masking tape should be removed after painting is finished.
The theft-protection label should not be removed from original parts or replacement parts.

Fig 1: Identifying Theft-Protection Labels For Original And Replacement Parts
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

LOCATIONS

Fig 2: Locating Theft-Protection Labels Area - 01

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Locating Theft-Protection Labels Area - 02

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.