Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) | |
| With engine stopped | 10 (0.4) or less | - | ||
| Steering angle | Inside wheel | 37° 12' +/- 200' < vehicles with 16-inch wheels > 33° 48' +/- 200' < vehicles with 17-inch wheels > |
- | |
| Outside wheel (reference) | 30° 18' < vehicles with 16-inch wheels > 28° 18' < vehicles with 17-inch wheels > |
- | ||
| Toe-in mm (in) | 0 +/- 3 (0 +/- 0.12) | - | ||
| Tie rod end ball joint breakaway torque N.m (in-lb) | 0.5-3.5 (4.4-31.0) | - | ||
| Tie rod swing resistance N (lb) [Tie rod swing torque N.m (in-lb)] | 3.7-18.1 (0.83-4.07) < vehicles with 16-inch wheels > 3.6-17.8 (0.81-4.00) < vehicles with 17-inch wheels > [1.0-4.9 (8.8-43.4)] |
- | ||
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 30 (6.7) or less [5.9 (1.33) or less] |
- | ||
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 8.3-8.8 (1,204-1,276) < 2.4L engine > 9.3-9.8 (1,349-1,421) < 3.8L engine > |
- | |
| Pressure under no-load conditions | 0.8-1.0 (116-145) < 2.4L engine > 0.8-1.0 (116-145) < 3.8L engine > |
- | ||
| Steering gear retention hydraulic pressure | 8.3-8.8 (1,204-1,276) < 2.4L engine > 9.3-9.8 (1,349-1,421) < 3.8L engine > |
- | ||
| Oil pressure switch operating pressure MPa (psi) | OFF --> ON | 1.8-2.4 (261-348) | - | |
| ON --> OFF | 0.8-2.4 (116-348) | - | ||
| Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | 0.8-1.9 (7.1-16.8) [0.7 (6.2) or less] |
- | ||
| Opening dimension of special tool MB991561 mm (in) | 1.9 (0.07) | - | ||
| Band crimped width mm (in) | 1.4-1.8 (0.06-0.07) | - | ||