Service Specification
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATION
| ITEM | STANDARD VALUE | LIMIT |
|---|---|---|
| Manifold distortion of the installation surface mm (in) | 0.15 (0.006) or less | 0.20 (0.008) |
| Intake charge pressure kPa (psi) | 112 - 139 (16.2 - 20.2) | - |
| Turbocharger wastegate actuator pressure kPa (psi) | Approximately 100 (15) | - |
| Turbocharger wastegate solenoid terminal resistance [at 20° C (68° F)] Ω | 29 - 35 | - |