Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEMS | SPECIFICATIONS |
|---|---|
| Brake line | |
| Brake tube flare nut | 15 +/- 2 N. m (12 +/- 1 ft-lb) |
| Brake pedal | |
| Brake pedal assembly bolt | 12 +/- 2 N. m (107 +/- 17 in-lb) |
| Brake pedal assembly nut | 14 +/- 3 N. m (124 +/- 26 in-lb) |
| Front disc brake | |
| Brake hose connector bolt | 30 +/- 5 N. m (22 +/- 4 ft-lb) |
| Caliper bleeder | 14 +/- 2 N. m (124 +/- 18 in-lb) |
| Front brake assembly mounting bolt | 108 +/- 10 N. m (80 +/- 7 ft-lb) |
| Master cylinder assembly and brake booster | |
| Brake booster mounting nut | 14 +/- 3 N. m (124 +/- 26 in-lb) |
| Fitting | 16 +/- 1 N. m(12 +/- 1 ft-lb) |
| Master cylinder mounting nut | 10 +/- 2 N. m (89 +/- 17 in-lb) |
| Operating rod jam nut | 22 +/- 3 N. m (16 +/- 2 ft-lb) |
| Proportioning valve < Vehicles without ABS > | 30 +/- 5 N. m (22 +/- 4 ft-lb) |
| Rear disc brake | |
| Brake hose connector bolt | 15 +/- 2 N. m (12 +/- 1 ft-lb) |
| Caliper bleeder | 14 +/- 2 N. m (124 +/- 18 in-lb) |
| Rear brake assembly mounting bolt | 54 +/- 5 N. m (40 +/- 4 ft-lb) |