Adjustment Procedures Of SWS Function < Vehicles With Keyless Entry System >: Notes

WARNING: This page is about a different variant/trim than selected.

Required Special Tools:

MB991223: Harness Set
MB991529: Diagnostic Trouble Code Check Harness
MB991958: Scan Tool (M.U.T.-III Sub Assembly)
MB992006: Extra Fine Probe

The following functions can be enabled or disabled by operating input switches in a special manner. This set mode is stored after the battery is disconnected.

Keyless entry hazard answerback function
Headlight automatic shutdown function
Initialization of above mentioned functions

NOTE: The keyless entry hazard answerback can be also adjusted by operating the RKE transmitter. (however, this adjustment can be done more easily by operating the transmitter.) Refer to ENABLING/DISABLING THE ANSWERBACK FUNCTION .