LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Lancer Evolution RS >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>J<< Thrust Plate Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>J<< Thrust Plate Installation

  1. Install the thickest thrust plates that can be fitted in the groove of the input shaft. Install the thrust plate so the surface stamped with the identification mark is facing up.
  2. Make sure that the 5th speed gear end play meets the standard value.

    Standard value: 0 - 0.09 mm (0 - 0.0035 inch) 

    Fig 1: Installing Thrust Plate So Surface Stamped With
    G04275833Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals