Scan Tool Or Voltmeter
If a problem is found in the Pulse Check, observe the table below.
SCAN TOOL OR VOLTMETER CHART
| SYMPTOM | INSPECTION PROCEDURE | |
|---|---|---|
| The ETACS-ECU does not receive any signal from the key reminder switch. | O-1 | |
| The ETACS-ECU does not receive any signal from the hazard warning light switch. | O-2 | |
| The ETACS-ECU does not receive any signal from the driver's seat belt switch. | O-3 | |
| The ETACS-ECU does not receive any signal from all the door switches. | O-4 | |
| The ETACS-ECU does not receive any signal from the door lock key cylinder switch. | O-5 | |
| The ETACS-ECU does not receive any signal from the door lock actuator. | O-6 | |
| The ETACS-ECU does not receive any signal from the door lock switch (incorporated in power window main switch and power window sub switch). | O-7 | |
| The ETACS-ECU does not receive any signal from the vehicle speed sensor. | O-8 | |
| Transmitter | The ETACS-ECU does not receive any signal from the lock or unlock switch. | O-9 |
| The ETACS-ECU does not receive any interior light loaded signal. | O-10 | |