Configuration Of Functions
FUNCTIONS CONFIGURATION
| ITEM | ADJUSTMENT PROCEDURE |
|---|---|
| Keyless entry hazard answerback | If the transmitter "LOCK" switch is turned on twice within two seconds, the lock answerback function is enabled or disabled.
If the transmitter "UNLOCK" switch is turned on twice within two seconds, the unlock answerback function is enabled or disabled.
|
| Vehicle speed-dependent wiper function | The vehicle speed-dependent wiper function is enabled or disabled by turning on the windshield wiper mist switch for two seconds or more.
|
| Headlight automatic shutdown function | If the passing switch is turned ON for more than two seconds with the headlight switch turned to ON and the turn-signal light switch (RH) turned ON, the headlight automatic shutdown function is switched in the following order: (After "c", the function returns to "a" and repeats the sequence from "a".)
|
| Delay-off time of the dome light | When the turn-signal light switch is moved in the order of LH --> RH --> LH --> RH --> LH, the dome light delay-off time will be changed as follows. (After "e", the function returns to "a" and repeats the sequence from "a".)
|
| Interior light automatic shut-down function | The interior light automatic shut-down function is disabled or enabled by turning on the hazard warning light switch for two seconds or more.
|
| Initialization of above mentioned functions | If the windshield washer switch is turned ON for more than 20 seconds, the tone alarm sounds twice and all functions are initialized. (The configuration mode entry tone alarm sounds after 10 seconds, but the switch must kept ON for 20 seconds to achieve initialization.) If the windshield washer switch is kept ON for more than 20 seconds without prior entry of the configuration mode, the configuration mode is entered after 10 seconds and initialization does not take place. |