Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION | |
|---|---|---|
| Air cleaner < 2.0L Engine > | ||
| Air cleaner bracket bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) | |
| Air cleaner housing assembly bolt | 8.8 +/- 1.0 N.m (78 +/- 9 in-lb) | |
| Air flow sensor assembly nut | 8.8 +/- 1.0 N.m (78 +/- 9 in-lb) | |
| Air intake hose clamp bolt | 3.9 +/- 1.0 N.m (35 +/- 8 in-lb) | |
| Air cleaner < 2.4L Engine > | ||
| Air cleaner bracket bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) | |
| Air cleaner housing assembly bolt | 8.8 +/- 1.0 N.m (78 +/- 9 in-lb) | |
| Air intake hose clamp bolt | 3.9 +/- 1.0 N.m (35 +/- 8 in-lb) | |
| Mass airflow sensor assembly bolt | 1.8 +/- 0.6 N.m (16 +/- 5 in-lb) | |
| Exhaust manifold < 2.0L Engine > | ||
| Exhaust manifold bracket bolt | M8 | 19 +/- 3 N.m (14 +/- 2 ft-lb) |
| M10 | 35 +/- 6 N.m (26 +/- 4 ft-lb) | |
| Exhaust manifold nut | M8 | 17 +/- 2 N.m (13 +/- 1 ft-lb) |
| M10 | 30 +/- 2 N.m (22 +/- 2 ft-lb) | |
| Front exhaust pipe nut | 50 +/- 10 N.m (37 +/- 7 ft-lb) | |
| Heat protector bolt | 13 +/- 1 N.m (115 +/- 9 in-lb) | |
| Heated oxygen sensor | 44 +/- 5 N.m (33 +/- 3 ft-lb) | |
| Power steering pump bracket stay bolt | 49 +/- 9 N.m (36 +/- 7 ft-lb) | |
| Power steering oil pump and bracket assembly bolt | M8 | 22 +/- 4 N.m (16 +/- 3 ft-lb) |
| M10 | 44 +/- 10 N.m (33 +/- 7 ft-lb) | |
| Pressure hose clamp bolt | 12 +/- 2 N.m (102 +/- 22 in-lb) | |
| Exhaust manifold < 2.4L ENGINE, EXCPT FOR CALIFORNIA> | ||
| Exhaust manifold nut | 49 +/- 5 N.m (36 +/- 4 ft-lb) | |
| Front exhaust pipe nut | 50 +/- 10 N.m (37 +/- 7 ft-lb) | |
| Front exhaust pipe bracket bolt | 35 +/- 5 N.m (26 +/- 4 ft-lb) | |
| Heat protector bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) | |
| Exhaust manifold < 2.4L ENGINE, VEHICLES FOR CALIFORNIA> | ||
| Exhaust manifold bracket bolt | 35 +/- 6 N.m (26 +/- 4 ft-lb) | |
| Exhaust manifold nut | 49 +/- 5 N.m (36 +/- 4 ft-lb) | |
| Front exhaust pipe bolt | 50 +/- 5 N.m (37 +/- 4 ft-lb) | |
| Heat protector bolt | 30 +/- 2 N.m (22 +/- 2 in-lb) | |
| Exhaust pipe and main muffler < 2.0L Engine > | ||
| Center exhaust pipe bolt | 45 +/- 5 N.m (34 +/- 3 ft-lb) | |
| Center exhaust pipe nut | 59 +/- 10 N.m (44 +/- 7 ft-lb) | |
| Front exhaust pipe nut | 50 +/- 10 N.m (37 +/- 7 ft-lb) | |
| Hanger bolt | 13 +/- 2 N.m (111 +/- 22 in-lb) | |
| Heated oxygen sensor | 44 +/- 5 N.m (33 +/- 3 ft-lb) | |
| Exhaust pipe and main muffler < 2.4L ENGINE, EXCPT FOR CALIFORNIA> | ||
| Center exhaust pipe bolt | 45 +/- 5 N.m (34 +/- 3 ft-lb) | |
| Center exhaust pipe nut | 59 +/- 10 N.m (44 +/- 7 ft-lb) | |
| Front exhaust pipe bracket bolt | 35 +/- 5 N.m (26 +/- 4 ft-lb) | |
| Front exhaust pipe nut | 50 +/- 10 N.m (37 +/- 7 ft-lb) | |
| Hanger bolt | 13 +/- 2 N.m (111 +/- 22 in-lb) | |
| Heated oxygen sensor (front) | 45 +/- 5 N.m (34 +/- 3 ft-lb) | |
| Heated oxygen sensor (rear) | 45 +/- 5 N.m (34 +/- 3 ft-lb) | |
| Exhaust pipe and main muffler < 2.4L ENGINE, VEHICLES FOR CALIFORNIA> | ||
| Center exhaust pipe bolt | 45 +/- 5 N.m (34 +/- 3 ft-lb) | |
| Center exhaust pipe nut | 59 +/- 10 N.m (44 +/- 7 ft-lb) | |
| Front exhaust pipe bolt (catalytic converter side) | 49 +/- 10 N.m (37 +/- 7 ft-lb) | |
| Front exhaust pipe bolt (exhaust manifold side) | 50 +/- 5 N.m (37 +/- 4 ft-lb) | |
| Hanger bolt | 13 +/- 2 N.m (111 +/- 22 in-lb) | |
| Heated oxygen sensor (rear) | 45 +/- 5 N.m (34 +/- 3 ft-lb) | |
| Main muffler bolt | 45 +/- 5 N.m (34 +/- 3 ft-lb) | |
| Intake manifold < 2.0L Engine > | ||
| Auto cruise vacuum pipe hose bolt | 4.9 +/- 0.9 N.m (43 +/- 8 in-lb) | |
| EGR valve bolt | 22 +/- 4 N.m (16 +/- 3 ft-lb) | |
| Engine hanger bolt | 24 +/- 3 N.m (18 +/- 2 ft-lb) | |
| Intake manifold bolt and nut | 19 +/- 3 N.m (14 +/- 2 ft-lb) | |
| Intake manifold stay bolt | 31 +/- 3 N.m (23 +/- 2 ft-lb) | |
| Manifold absolute pressure sensor bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) | |
| Throttle body stay bolt | 24 +/- 3 N.m (18 +/- 2 ft-lb) | |
| Vacuum hose and pipe assembly bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) | |
| Vacuum pipe bolt | 5.0 +/- 1.0 N.m (45 +/- 8 in-lb) | |
| Intake manifold < 2.4L Engine > | ||
| Brake booster vacuum pipe bolt | 13 +/- 2 N.m (111 +/- 22 in-lb) | |
| EGR valve bolt | 24 +/- 3 N.m (18 +/- 2 ft-lb) | |
| Engine hanger bolt | 24 +/- 3 N.m (18 +/- 2 ft-lb) | |
| Evaporative emission purge solenoid valve, evaporative emission vacuum hose and pipe assembly bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) | |
| Harness cramp bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) | |
| Intake manifold bolt | 24 +/- 3 N.m (18 +/- 2 ft-lb) | |
| Intake manifold nut | 20 +/- 2 N.m (15 +/- 1 ft-lb) | |
| Intake manifold stay bolt | 31 +/- 3 N.m (23 +/- 2 ft-lb) | |
| Knock sensor connector cramp bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) | |
| Manifold absolute pressure sensor bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) | |
| Oil dipstick guide bolt | 13 +/- 1 N.m (115 +/- 9 in-lb) | |
| Thermostat case assembly bolt | 24 +/- 4 N.m (18 +/- 3 ft-lb) | |