Service Specifications
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Brake pedal height mm (in) | 169.1 -172.1 (6.7-6.8) | - | |
| Brake pedal free play mm (in) | 3-8(0.12-0.31) | - | |
| Brake pedal to floor board clearance mm (in) | 90 (3.5) or more | - | |
| Proportioning valve output fluid pressure MPa (psi) | Split point | 3.19-3.67(463-532) | - |
| When input fluid pressure is 6.86 MPa (995 psi) | 4.17-4.66(605-676) | - | |
| Proportioning valve output fluid pressure difference between left and right MPa (psi) | - | 0.5 (73) | |
| Disc brake pad thickness mm (in) | 10.0(0.39) | Minimum 2.0 (0.08) | |
| Disc brake disc thickness mm (in) | Front | 26.0(1.02) | Minimum 24.4 (0.96) |
| Rear | 10.0(0.39) | Minimum 8.4 (0.33) | |
| Disc brake disc run-out mm (in) | Front | - | 0.015(0.0006) |
| Rear | - | 0.04(0.0015) | |
| Disc brake drags force N (lb) | Front | 78 (17) or less | - |
| Rear | 68(15) or less | - | |
| Rear drum brake lining thickness mm (in) | 4.3(0.17) | Minimum 1.0 (0.04) | |
| Rear drum inside diameter mm (in) | 203 (7.99) | 205 (8.07) | |
| Front hub end play mm (in) | - | 0.05 (0.002) | |
| Brake booster push rod protruding length mm (in) | 2.0 L | 9.18-9.43(0.361-0.371) | - |
| 2.4 L | 9.68 - 9.92 (0.381-0.390) | - | |