LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Overhaul) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>C<< Transfer Driven Gear Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>C<< Transfer Driven Gear Installation

WARNING: This page is about a different variant/trim than selected.
  1. Set the output shaft on the press support stand.
  2. Using special tools MD998823, MD998812 and MD998813, press in the transfer driven gear.
Fig 1: Pressing In Transfer Driven Gear
G04277347Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals