>>F<< ETJ Case Installation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
The driveshaft joint uses special grease. Do not mix old and new or different types of grease.
After applying the specified grease to the ETJ case, insert the driveshaft and apply grease again.
Specified grease: Repair kit grease
Amount to use < LH >: 130 +/- 10 g (4.6 +/- 0.3 ounces)
Amount to use < RH >: 120 +/- 10 g (4.2 +/- 0.3 ounces)
NOTE:
The grease in the repair kit should be divided in half for use, respectively, at the joint and inside the boot.