Service Specifications
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Wheel bearing end play mm (in) | - | 0.05 (0.002) | |
| Wheel bearing rotation starting torque N.m (in-lb) | - | 1.8 (16) | |
| Protruding length of stabilizer bar mounting bolt mm (in) | 22 +/- 1.5 (0.87 +/- 0.06) | - | |
| Setting of TJ boot length mm (in) | 90 +/- 3 (3.54 +/- 0.12) | - | |
| Setting of ETJ boot length mm (in) | 80 +/- 3 (3.15 +/- 0.12) | - | |
| Opening dimension of the special tool (MB991561) mm (in) | When the BJ/EBJ boot band (small) is crimped | 2.9 (0.11) | - |
| When the BJ/EBJ boot band (large) is crimped | 3.2 (0.13) | - | |
| Crimped width of the BJ/EBJ boot band mm (in) | 2.4 - 2.8 (0.10 - 0.11) | - | |