Occupant Classification Sensor: Inspection
WARNING: This page is about a different variant/trim than selected.
WARNING:
If a dent, crack, deformation or rust is detected, replace with a new seat slide adjuster.
NOTE:
For checking of the occupant classification sensor other than described below, refer to the section concerning SRS diagnosis (refer to
DIAGNOSTIC TROUBLE CODE CHART ).
- Check the occupant classification sensor for dent, cracks or deformation.
- Check the connector for damage, and terminals for deformation.
- Check that there is no bending or corrosion in the seat slide adjuster.
- Carry out the accuracy check of occupant classification sensor (refer to ACCURACY CHECK OF OCCUPANT CLASSIFICATION SENSOR ).