LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Lancer Evolution >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering - Lancer Evolution >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >> J << Rack Support Cover/Jam Nut Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> J << Rack Support Cover/Jam Nut Installation

  1. Position the rack at its center.
  2. Apply 3M™ AAD Part number 8661, 8663, 8672, 8678, 8679 or equivalent to the threaded part of the rack support cover.
  3. Use special tool MB991621 to tighten the rack support cover to 23 +/- 2 N. m (17 +/- 1 ft-lb).
  4. Turn the rack support cover 30 degrees counterclockwise.
  5. Use special tool MB991204 to hold the rack support cover, and then tighten the jam nut to 59 +/- 10 N. m (44 +/- 7 ft-lb).
    Fig 1: Holding Rack Support Cover Using Special Tool
    G04297633Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals