INSPECTION PROCEDURE 2: Accelerator Pedal Operation is not Smooth (Over Acceleration): Diagnosis
- STEP 1. Check the accelerator pedal.
Q: Is the accelerator pedal loose?
YES : Tighten the fasteners, then go to Step 4.
NO : Go to Step 2.
- STEP 2. Check the accelerator cable wiring.
Q: Is the accelerator cable routing bent sharply?
YES : Correct the cable routing, then go to Step 4.
NO : Go to Step 3.
- STEP 3. Check the accelerator cable lubricant.
Q: Is the accelerator cable lubricated sufficiently?
YES : There is no action to be taken.
NO : Refill or replace the lubricant, then go to Step 4.
- STEP 4. Retest the system.
Q: Does the accelerator pedal work normally?
YES : The procedure is complete.
NO : Return to Step 1.