Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) | |
| With engine stopped | 10 (0.4) or less | - | ||
| Steering angle | Inside wheel | 34°50' +/- 1°30' | - | |
| Outside wheel (reference) | 29°20' | - | ||
| Toe-in mm (in) | 1 +/- 2(0.04 +/- 0.09) | - | ||
| Tie rod end ball joint breakaway torque N.m (in-lb) | 0.5-2.5 (4.4 - 22.1) | - | ||
| Tie rod swing resistance N (lb) [Tie rod swing torque N.m (in-lb)] | 6 -19 (26.7 -84.5) [1.5 -4.9 (13.2 -43.4)] | - | ||
| Engine idle speed r/min | 700 +/- 50 | - | ||
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 29 (6.5) or less [5.9 (1.33) or less] | - | ||
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 8.8 -9.5 (1,276 -1,378) | - | |
| Pressure under no-load conditions | 0.8 -1.0 (116 -145) | - | ||
| Steering gear retention hydraulic pressure | 8.8 -9.5 (1,276 -1,378) | - | ||
| Oil pressure switch operating pressure MPa (psi) | OFF -->ON | 1.5 -2.0 (217 -290) | - | |
| ON -->OFF | 0.7 -2.0 (102 -290) | - | ||
| Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | 0.6 -1.6 (5.3 -14.2) [0.4 (3.5) or less] | - | ||
| Opening dimension of special tool MB991561 mm (in) | 2.9 (0.11) | - | ||
| Band crimped width mm (in) | 2.4 -2.8 (0.09 -0.11) | - | ||