LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Eclipse GS, Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Front Axle >> Front Axle Hub Assembly >> Removal And Installation >> Removal Service Points >> << E >> Front Wheel Hub Assembly Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<< E >> Front Wheel Hub Assembly Removal

  1. Remove the front wheel hub mounting bolts while pushing out the drive shaft by hand.
  2. If it is difficult to push out the drive shaft by hand, use special tools MB990242, MB990244, MB991354 and MB990767 to push out the drive shaft from the hub and knuckle.
  3. If the front wheel hub is seized, remove the knuckle together with front wheel hub and fix them with a vise.
  4. Hang the drive shaft on the vehicle body with a rope.
    Fig 1: Removing Front Wheel Hub Mounting Bolts While Pushing Out Driveshaft Using Special Tools
    G04231706Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Use special tools MB990244, MB991354 and MB990211 to pull out the front wheel hub from the knuckle.
    Fig 2: Pulling Out Front Wheel Hub From Knuckle Using Special Tools
    G04231707Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals