MULTIPORT Fuel Injection (3.8L) - Eclipse - General Description, Introduction, Diagnostic Trouble Code And Symptom Charts

• General Description
  • Notes
  • Fuel Injection Control
  • Throttle Valve Opening Control
  • Idle Air Control
  • Ignition Timing Control
  • Diagnostic Test Mode
  • Other Control Functions
    • Fuel Pump Control
    • A/C Compressor Clutch Relay Control
    • Fan Control
    • Generator Output Current Control
    • Evaporative Emission Purge Control
    • EGR Control
  • MULTIPORT Fuel Injection (MFI) System Diagram
• MULTIPORT Fuel Injection (MFI) Diagnosis
  • Troubleshooting Strategy
  • Diagnostic Function
    • Malfunction Indicator Lamp (Service Engine Soon Or Check Engine Lamp)
      • Notes
      • Items Indicated by the Malfunction Indicator Lamp (SERVICE ENGINE SOON or Check Engine Lamp)
    • How To Connect The Scan Tool (Mut-III)
    • How To Read And Erase Diagnostic Trouble Codes.
    • How To Read Data List
    • How To Perform Actuator Test
    • How To Diagnose The Can Bus Lines
    • Provisional DTCS [OBD-II Test Mode - Results (Mode 7)]
    • Mode 6 Reference Table
    • Diagnostic By Diagnostic Test Mode II (Increased Sensitivity)
    • On-Board Diagnostics
    • OBD - II Drive Cycle
      • Notes
      • Drive Cycle Pattern List
      • Pattern 1
      • Pattern 2
      • Pattern 3
      • Pattern 4
      • Pattern 5
      • Pattern 6
      • Pattern 7
      • Pattern 8
      • Pattern 9
      • Pattern 10
      • Pattern 11
      • Pattern 12
      • Pattern 13
      • Pattern 14
      • Pattern 15
      • Pattern 16
      • Pattern 17
      • Pattern 18
      • Pattern 19
      • Pattern 20
      • Pattern 21
      • Pattern 22
    • System Readiness Test Status
      • Purpose
      • Overview
  • Fail-Safe Function Reference Table
  • Diagnostic Trouble Code Chart
  • Symptom Chart
    • Notes
    • Problem Symptoms Table (For Your Information)