LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Eclipse SE, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Chassis Electrical >> Combination Meter Assembly >> On-Vehicle Service >> Fuel Level Sensor Check >> Fuel Level Sensor Resistance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Level Sensor Resistance

  1. Check the resistances between fuel level sensor main terminals 1 and 2 as well as sub terminals 1 and 2 of the fuel pump module, respectively.

    Standard value: 

    FUEL LEVEL SENSOR RESISTANCE SPECIFICATION

    ITEM FUEL LEVEL SENSOR (main) FUEL LEVEL SENSOR (sub)
    Resistance Ω Point "F" (highest) 6.5 6.5 ± 1.0
    Point "E" (lowest) 45.1 74.9 ± 1.0
  2. Check that resistance value changes smoothly when the float moves slowly between points.
  3. If all checks are correct, go to fuel unit height check. If any check is not correct, replace the fuel pump module or fuel level sensor (sub).
Fig 1: Checking Resistances Between Fuel Level Sensor (Main & Sub) Terminals 1 And 2
G05106321Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals