Data List Reference Table
The following items can be read by the scan tool from the TCL/ASC-ECU input data.
DATA LIST REFERENCE
| M.U.T.-III SCAN TOOL DISPLAY | ITEM NO. | CHECK ITEM | CHECKING REQUIREMENTS | NORMAL VALUE |
|---|---|---|---|---|
| FR wheel ABS drive | 01 | Front-right ABS sensor | Drive the vehicle | Vehicle speeds displayed on the speedometer and scan tool are identical. |
| FL wheel ABS drive | 02 | Front-left ABS sensor | ||
| RR wheel ABS drive | 03 | Rear-right ABS sensor | ||
| RL wheel ABS drive | 04 | Rear-left ABS sensor | ||
| Battery voltage | 05 | ABS-ECU power supply voltage | Ignition switch power supply voltage and valve monitor voltage | Battery positive voltage |
| Stoplight switch | 06 | Stoplight switch | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| Straight G sensor | 30 | Straight G | -9.8 - 9.8 m/s2 | |
| Lateral G sensor | 31 | Lateral G | -9.8 - 9.8 m/s2 | |
| Steering angle | 32 | Steering angle | -900 - 900 deg | |
| Yaw rate sensor | 33 | Yaw rate | -50 - 50 deg/s | |
| Master cylinder pressure | 34 | Master cylinder pressure | The value fluctuates significantly as the brake pedal is depressed. | 0 - 5 V |
| TCL mode | 35 | TCL mode | TCL OFF switch: ON | OFF |
| TCL OFF switch: OFF | ON | |||
| Brake indicator lamp | 36 | Brake warning light | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| ASC disable state | 37 | Whether the ASC control is possible or not | Possible | Enable |
| Impossible | disable | |||
| Sum of ASC disable state | 38 | Number of times the ASC control is impossible | 0 - 255 | |