September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Level Sensor Resistance
- Check the resistances between fuel level sensor main terminals 1 and 2 as well as sub terminals 1 and 2 of the fuel pump module, respectively.
FUEL LEVEL SENSOR RESISTANCE (STANDARD VALUE)
| ITEM |
FUEL LEVEL SENSOR (main) |
FUEL LEVEL SENSOR (sub) |
| Resistance Ω |
Point "F" (highest) |
6.5 |
6.5 ± 1.0 |
| Point "E" (lowest) |
45.1 |
74.9 ± 1.0 |
- Check that resistance value changes smoothly when the float moves slowly between points.
- If all checks are correct, go to fuel unit height check. If any check is not correct, replace the fuel pump module or fuel level sensor (sub).
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.