LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Lancer Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Simplified Wiring System - Lancer >> Input Signal Procedures >> INSPECTION PROCEDURE M-3: ETACS-ECU does not receive "R" position signal from transmission range switch < A/T >. >> Technical Description (Comment)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Technical Description (Comment)

If the signal is not normal, the rear wiper does not operate consecutively twice when the selector lever is moved to the "R" position with the rear wiper on. If the signal is not normal, the transmission range switch or the ETACS-ECU may be defective.

NOTE: The transmission range switch is shared with the automatic transaxle control system. If this problem is not solved, carry out the troubleshooting regarding the automatic transaxle control system. Refer to , A/T DIAGNOSIS <2.0L> AUTOMATIC TRANSAXLE DIAGNOSIS <2.4L>.
scientia non olet · About LEMON Manuals