INSPECTION PROCEDURE 3: Accelerator Pedal Operation not Smooth (Over Acceleration): Diagnosis
- STEP 1.Check the accelerator pedal.
Q: Is the accelerator pedal loose?
YES : Tighten, then go to Step 4.
NO : Go to Step 2.
- STEP 2.Check the accelerator cable wiring.
Q: Is the accelerator cable routing bent sharply?
YES : Repair, then go to Step 4.
NO : Go to Step 3.
- STEP 3.Check the accelerator cable lubricant.
Q: Is the accelerator cable lubricated sufficiently?
YES : There is no action to be taken.
NO : Refill or replace the lubricant, then go to Step 4.
- STEP 4.Retest the system.
Q: Does the accelerator pedal work normally?
YES : The procedure is complete.
NO : Go to Step 1.