Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| ITEMS | SPECIFICATIONS |
|---|---|
| Brake line | |
| Brake tube flare nut | 15 +/- 2 N.m (12 +/- 1 ft-lb) |
| Brake pedal | |
| Pedal support member mounting bolt | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Pedal support member mounting nut | 14 +/- 3 N.m (124 +/- 26 in-lb) |
| Front disc brake <2.0 L> | |
| Bleeder screw | 7.9 +/- 0.9 N.m (70 +/- 8 in-lb) |
| Brake hose connector bolt | 30 +/- 5 N.m (22 +/- 4 ft-lb) |
| Front brake assembly mounting bolt | 100 +/- 10 N.m (74 +/- 7 ft-lb) |
| Slide pin (main) | 84 +/- 4 N.m (62 +/- 3 ft-lb) |
| Slide pin (sub) | 49 +/- 4 N.m (37 +/- 3 ft-lb) |
| Front disc brake <2.4 L> | |
| Bleeder screw | 7.9 +/- 0.9 N.m (70 +/- 8 in-lb) |
| Brake hose connector bolt | 30 +/- 5 N.m (22 +/- 4 ft-lb) |
| Front brake assembly mounting bolt | 100 +/- 10 N.m (74 +/- 7 ft-lb) |
| Front brake bolt (pin bolt) | 38 +/- 4 N.m (28 +/- 3 ft-lb) |
| Master cylinder assembly and brake booster | |
| Brake booster mounting nut | 14 +/- 3 N.m (124 +/- 26 in-lb) |
| Fitting | 16 +/- 1 N.m (12 +/- 1 ft-lb) |
| Master cylinder mounting nut | 10 +/- 2 N.m (89 +/- 17 in-lb) |
| Operating rod jam nut | 22 +/- 3 N.m (16 +/- 2 ft-lb) |
| Proportioning valve | 30 +/- 5 N.m (22 +/- 4 ft-lb) |
| Rear drum brake | |
| Bleeder screw | 7.9 +/- 0.9 N.m (70 +/- 8 in-lb) |
| Backing plate bolt | 60 +/- 5 N.m (45 +/- 3 ft-lb) |
| Lock nut | 175 +/- 25 N.m (130 +/- 18 ft-lb) |
| Wheel cylinder mounting bolt | 9.8 +/- 2.0 N.m (87 +/- 17 in-lb) |
| Rear disc brake | |
| Bleeder screw | 7.9 +/- 0.9 N.m (70 +/- 8 in-lb) |
| Brake hose flare nut | 15 +/- 2 N.m (12 +/- 1 ft-lb) |
| Rear brake assembly mounting bolt | 60 +/- 5 N.m (45 +/- 3 ft-lb) |
| Rear brake pin (lock pin/guide pin) | 44 +/- 5 N.m (32 +/- 4 ft-lb) |