LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Lancer Standard >> Repair and Diagnosis (Single Page) >> Steering >> Steering Gear >> Power Steering - Lancer >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >>C<< Rack Assembly Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>C<< Rack Assembly Installation

CAUTION: Do not close the vent hole in the rack with grease.
  1. Apply a coating of multipurpose grease to the rack teeth face.
    Fig 1: Applying Coating Of Multipurpose Grease To Rack Teeth Face
    G04277852Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Cover rack serrations with special tool MB991213.
  3. Apply GENUINE MITSUBISHI POWER STEERING FLUID to special tool MB991213.
  4. Align the center of the oil seal with the rack to prevent the retainer spring from slipping. Slowly insert the rack from power cylinder side.
Fig 2: Aligning Center Of Oil Seal With Rack To Prevent Retainer Spring From Slipping
G04277853Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals