Assembly/Shoe-To-Lever Spring/Auto Adjuster Assembly Installation

WARNING: This page is about a different car, the 2005 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the shoe and lever assembly, the adjuster lever, the shoe and lining assembly, the shoe-to-lever spring, the automatic adjuster assembly temporarily.

Fig 1: Assembling Shoe And Lever Assembly
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Depress the wheel cylinder piston by hand.

Fig 2: Depressing Wheel Cylinder Piston
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Install the assembly to the backing plate carefully.

Fig 3: Installing Auto Adjuster Assembly To Backing Plate
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.