Service Specifications
GENERAL SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) | |
| With engine stopped | 10 (0.4) or less | - | ||
| Steering angle | Inside wheel | Vehicle with 14 inch tire | 40°40' +/- 1°30' | - |
| Vehicle with 15 inch tire | 39°30' +/- 1°30' | - | ||
| Vehicle with 16 inch tire | 33°40' +1°00'/-2°00' | - | ||
| Outside wheel (reference) | Vehicle with 14 inch tire | 33°20' | - | |
| Vehicle with 15 inch tire | 32°30' | - | ||
| Vehicle with 16 inch tire | 28°46' | - | ||
| Toe-in mm (in) | 1 +/- 2 (0.04 +/- 0.09) | - | ||
| Tie rod end ball joint breakaway torque N.m (in-lb) | 0.5 - 2.5 (4.4 - 22.1) | - | ||
| Tie rod swing resistance N (lb) [Tie rod swing torque N.m (in-lb)] | 6 - 19 (26.7 - 84.5) [1.5 - 4.9 (13.2 - 43.4)] | - | ||
| Engine idle speed r/min | 700 +/- 50 | - | ||
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 29 (6.5) or less [5.9 (1.33) or less] | - | ||
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 8.8 - 9.5 (1,276 - 1,378) | - | |
| Pressure under no-load conditions | 0.8 - 1.0 (116 - 145) | - | ||
| Steering gear retention hydraulic pressure | 8.8 - 9.5 (1,276 - 1,378) | - | ||
| Oil pressure switch operating pressure MPa (psi) | OFF --> ON | 1.5 - 2.0 (217 - 290) | - | |
| ON --> OFF | 0.7 - 2.0 (102 - 290) | - | ||
| Gear box total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | Vehicles with 14 and 15 inch tire | 0.6 - 1.6 (5.3 - 14.2) [0.4 (3.5) or less] | - | |
| Vehicles with 16 inch tire | 0.7 - 2.1 (6.2 - 18.6) [0.6 (5.3) or less] | - | ||
| Opening dimension of special tool MB991561 mm (in) | 2.9 (0.11) | - | ||
| Band crimped width mm (in) | 2.4 - 2.8 (0.09 - 0.11) | - | ||