Special Tools
SPECIAL TOOLS CHART
| TOOL | TOOL NUMBER AND NAME | SUPERSESSION | APPLICATION |
|---|---|---|---|
| Engine hanger balancer | MZ203827-01 | When the engine hanger is used: Supporting the engine assembly during removal and installation of the transaxle assembly
NOTE:
Special tool MB991454 is a part of engine hanger attachment set MB991453.
|
|
| MB991527 Hanger |
- | ||
| MB991895 Engine hanger |
- | ||
| MB991928 Engine hanger A: MB991929 Joint (50) x2 B: MB991930 Joint (90) x2 C: MB991931 Joint (140) x2 D: MB991932 Foot (standard) x4 E: MB991933 Foot (short) x2 F: MB991934 Chain and hook assembly |
- | ||
| Ball joint remover | MB991113-01, MB990635-01 or general service tool | Knuckle and tie rod end ball joint breakaway torque check
NOTE:
Steering linkage puller(MB990635 or MB991113)is also used to disconnect knuckle and tie rod end ball joint.
|
|
| End yoke holder | MB990767-01 | Fixing of the hub | |
| MB990241 Axle shaft puller A: MB990242 Puller shaft B: MB990244 Puller bar |
MB990241-01 or General service tool | Removal of the drive shaft | |
| MB991354 | Puller body | General service tool | |
| A: MB991017 B: MB990998 C: MB991000 A, B: Front hub remover and installer C: Spacer |
MB990998-01 |
|
|
| MB991460 Plug | General service tool | Prevention of transmission fluid drain and of entry of foreign objects |