LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Front Axle >> Front Axle Hub Assembly >> Disassembly And Assembly >> Assembly Service Point >> >> C << Hub Rotation Starting Torque Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> C << Hub Rotation Starting Torque Check

  1. Set special tools MB991000 and MB991017 as shown in the figure, tighten the nut to the specified torque, and press-fit the hub into the knuckle.

    Tightening torque: 160 ± 16 N.m (118 ± 11 in-lb) 

  2. Rotate the hub to make the bearing well-greased.
    Fig 1: Setting Special Tools
    G04871508Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Use Special tool MB990326 to measure the hub rotation starting torque.

    Limit: 1.8 N.m (16 in-lb) 

  4. Hub rotation starting torque should be within the limit value, and there should be no roughness and gritty feeling in rotation.
    Fig 2: Measuring Hub Rotation Starting Torque
    G04871509Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals