Initialization Procedure
Required Special Tools:
- MB991958: Scan Tool (M.U.T.-III Sub Assembly)
- MB991824: V.C.I.
- MB991827: M.U.T.-III USB Cable
- MB991910: M.U.T.-III Main Harness A
Connect scan tool MB991958 to the 16-pin data link connector as follows.
NOTE:
For details on how to use scan tool MB991958, refer to the "M.U.T.-III Owner's Manual ."
- Ensure that the ignition switch is at the "LOCK" (OFF) position.
- Start up the personal computer.
- Connect special tool MB991827 to special tool MB991824 and the personal computer.
- Connect special tool MB991910 to the special tool MB991824.
- Connect special tool MB991910 to the data link connector of the vehicle.
- Turn the special tool MB991824 power switch to the "ON" position.NOTE: When the special tool MB991824 is energized, the special tool MB991824 indicator light will be illuminated in a green color.
- Turn the ignition switch to the "ON" position.
- Select "Special Function" form the menu screen.
- Select "Learned Value Reset" form the menu screen.
- Initialize the learning value.
- After initialization of the learning value, learn the idling in MFI engine. (Refer to LEARNING PROCEDURE FOR IDLING IN MFI ENGINE ).