LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Diagnosis & On-Vehicle Testing >> On-Vehicle Service >> Automatic Transaxle Control Component Check >> Paddle Shift Switch Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Paddle Shift Switch Check

  1. After operating the paddle shift levers (+ side, - side) by pulling them to the rearward of the vehicle, check that the levers are returned to the original positions quickly when released. Also, check that no looseness, friction or abnormal sound occurs.
  2. Remove the paddle shift assembly. (Refer to STEERING SHAFT .)
    Fig 1: Identifying Paddle Shift Lever
    G04871145Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Check for continuity between the paddle shift switch connector terminals.
    RESISTANCE SPECIFICATION

    Paddle shift lever Terminal number Resistance value
    Upshift and hold the lever. 1 - 2 Continuity exists. (2 Ω or less)
    Downshift and hold the lever. 2 - 3
    No operation No continuity between the terminals
    Fig 2: Identifying Paddle Shift Switch Connector Terminals
    G04871146Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. In the cases other than the above, replace the paddle shift assembly.
scientia non olet · About LEMON Manuals