Id Codes Registration Procedure: Notes

The ID codes necessary for the engine immobilizer system, the keyless entry system and the TPMS can be registered using the M.U.T.-III.

CAUTION: If the ignition key with transmitter is added or replaced, register the key (key ID), and then register the keyless entry secret code again.

SUPPLY UNIT LIST FOR INDIVIDUAL KEY

Ignition key (with transmitter)	NOTE: Blank key (It is the key that comes with the door service key set and the glove box service key set. It can only be used for locking and unlocking, and it cannot start the engine.)

KEY SUPPLY UNIT LIST FOR OTHER THAN INDIVIDUAL KEY

Full service key set	Handle lock service key set	Door service key set	Glove box service key set

NOTE: When re-registering the key (key ID), all the keys (key ID) registered before must be re-registered because all of them will be erased. After registering the keys, make sure that the engine is started normally with all of the keys registered.