July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Remote Controlled Radio Switch Continuity Check

Use an ohmmeter to measure the resistance value between the terminal.

TESTER CONNECTION AND SWITCH POSITION

Switch Position	Tester Connection	Measurement Value
No push	2 - 3	Approximately 3.1 kΩ
No push	2 - 4	Approximately 71 kΩ
"Mode" switch		Approximately 270 Ω
"CH up" switch		Approximately 740 Ω
"CH down" switch		Approximately 1.3 kΩ
"VOL up" switch		Approximately 2.1 kΩ
"VOL down" switch		Approximately 3.1 kΩ

Fig 1: Identifying Remote Controlled Radio Switch

G04874108

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Steering Audio Switch Connectors

G04873887

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.