Initialization Procedure For Throttle Actuator Control Motor
WARNING: This page is about a different car, the 2008 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
When the battery cable is disconnected and reconnected, throttle actuator control motor valve (Fully closed position) is eliminated, so that the throttle valve opening angle control would not be performed correctly. When the battery cable is disconnected and reconnected, initialize the throttle actuator control motor using the following procedure.
- Turn the ignition switch to the "ON" position and then, place the ignition switch in "LOCK" (OFF) position.
- For 10 seconds or more, keep the ignition switch in "LOCK" (OFF) position.