Service Specifications
WARNING: This page is about a different car, the 2008 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS CHART
| Item | Standard value | Limit | |
|---|---|---|---|
| Brake pedal height mm (in) | 221.8-227.8 (8.7-9.0) | - | |
| Dimension from the brake booster stud bolt end to the clevis hole center mm (in) | 75.8-80.2 (2.98-3.16) | - | |
| Brake pedal play mm (in) | 3-8 (0.12-0.31) | - | |
| Pedal-to-floor clearance when brake pedal is depressed mm (in) | [Pedal depression force: approx. 500 N] 80 (3.15) or more | - | |
| Fluid pressure generated by brake booster non-servo effect test kPa (psi) | Pedal depression force: 100 N | 200 (29) or more | - |
| Pedal depression force: 300 N | 1,800 (261) or more | - | |
| Fluid pressure generated by brake booster servo effect test kPa (psi) | Pedal depression force: 100 N | 6,050-7,950 (877-1,153) | - |
| Pedal depression force: 300 N | 10,720 (1,554) or more | - | |
| Front disc brake | Pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) |
| Brake disc thickness mm (in) | 26.0 (1.02) | 24.4 (0.96) | |
| Brake disc runout mm (in) | - | 0.06 (0.0024) | |
| Brake drag force N (lb) | 68 (15.3) or less | - | |
| Rear disc brake | Pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) |
| Brake disc thickness mm (in) | 10.0 (0.39) | 8.4 (0.33) | |
| Brake disc runout mm (in) | - | 0.08 (0.0032) | |
| Brake drag force N (lb) | 68 (15.3) or less | - | |
| Brake pedal distortion mm (in) | 250-254 (9.8-10.0) | - | |