Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) |
| With engine stopped | 16.5 (0.6) or less | - | |
| Steering angle | Inside wheel | 39° | - |
| Outside wheel (reference) | 32° | - | |
| Toe-in mm (in) | 1 ± 2 (0.04 ± 0.09) | - | |
| Tie rod end ball joint breakaway torque N.m (in-lb) | 2.9(26) or less | - | |
| Tie rod swing resistance N (lb) [Tie rod swing torque N.m (in-lb)] | 5 - 18 (44 - 80) [1.5 - 4.9 (13.2 - 43.4)] |
- | |
| Engine idle speed r/min | 650 ± 100 | - | |
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 29 (6.5) or less [5.9 (1.33) or less] |
- | |
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 8.8 - 9.5 (1,276 - 1,378) | - |
| Pressure under no-load conditions | 0.2 - 0.7 (29 - 101) | - | |
| Steering gear retention hydraulic pressure | 8.8 - 9.5 (1,276 - 1,378) | - | |
| Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | 0.6 - 1.6 (5.3 - 14.2) [0.4 (3.5) or less] |
- | |
| Opening dimension of special tool MB991561 mm (in) | 2.9 (0.11) | - | |
| Band crimped width mm (in) | 2.4 - 2.8 (0.09 - 0.11) | - | |