Power Windows: Description

The power window system allows each of the door windows to be raised and lowered electrically by actuating a switch on the trim panel of each respective door. A master switch on the driver side front door trim panel allows the driver to raise or lower each of the passenger door windows and to lock out the individual switches on the passenger doors from operation. The power window system receives battery feed through a circuit breaker in the Junction Block (JB), only when the ignition switch is in the On position. 

The power window system includes the power window switches on each door trim panel, the circuit breaker, and the power window motors inside each door. 

The power window motor and mechanism is integral to the power window regulator unit. If the power window motor or mechanism is inoperative or damaged, the entire power window regulator unit must be replaced. (Refer to BODY/DOOR - FRONT/REGULATOR - WINDOW - POWER/ REMOVAL  ) or (Refer to BODY/DOORS - REAR/REGULATOR - WINDOW - POWER/ REMOVAL  ) for the window regulator service procedures.