DTC U0141-Lost Communication With Front Control Module: Notes

Fig 1: Front Control Module Communication Circuit - Circuit Diagram

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS article.

• When Monitored: 

  Ignition run time is greater than 1 second. Battery voltage between 9 and 16 volts. 

• Set Condition: 

  The PCM doesn't receive a FCM message over the CAN C circuit for 7 consecutive seconds. The circuit is continuously monitored. 

Refer to ELECTRONIC CONTROL MODULES/DIAGNOSIS AND TESTING for diagnostic procedures and for further possible causes.