Remote Keyless Entry

The Remote Keyless Entry (RKE) system locks and unlocks doors, turns on interior lamps, and arms and disarms the Vehicle Theft Security System (if equipped). The RKE system operates on non-switched battery current through a fuse in the Integrated Power Module (IPM), so that the system remains operational, regardless of the ignition switch position. 

The RKE transmitters are also equipped with a Panic button. If the Panic button on the RKE transmitter is depressed, the horn will sound and the exterior lights will flash on the vehicle for about three minutes, or until the Panic button is depressed a second time. A vehicle speed of about 25.7 kilometers-per-hour (15 miles-per-hour) will also cancel the panic event. 

The RKE system can also perform other functions on this vehicle. If the vehicle is equipped with the optional Vehicle Theft Security System (VTSS), the RKE transmitter will arm the VTSS when the Lock button is depressed, and disarm the VTSS when the Unlock button is depressed. 

The RKE system includes two transmitters when the vehicle is shipped from the factory, but the system can retain the vehicle access codes of up to a total of four transmitters. The transmitter codes are retained in the RKE module memory, even if the battery is disconnected. If an RKE transmitter is inoperative or lost, new transmitter vehicle access codes can be programmed into the system using a scan tool. 

This vehicle also offers several customer programmable features, which allows the selection of several optional electronic features to suit individual preferences. Customer programmable feature options affecting the RKE system include: 

• Remote Unlock Sequence  - Allows the option of having only the driver side front door unlock when the RKE transmitter unlock button is depressed the first time. The remaining doors unlock when the button is depressed a second time within 5 seconds of the first unlock press. Another option is having all doors unlock upon the first depression of the RKE transmitter unlock button. 
• Sound Horn on Lock  - Allows the option of having the horn sound a short chirp as an audible verification that the RKE system received a valid lock request from the RKE transmitter, or having no audible verification. 
• Flash Lights with Lock and Unlock  - Allows the option of having the park lamps flash as an optical verification that the RKE system received a valid lock request or unlock request from the RKE transmitter, or having no optical verification. 
• Programming Additional Transmitters  - Allows up to a total of four transmitter vehicle access codes to be stored in the receiver memory. 

Certain functions and features of the RKE system rely upon resources shared with other electronic modules in the vehicle over the CAN data bus network. For diagnosis of these electronic modules or of the data bus network, the use of a scan tool and the appropriate diagnostic information are required.