LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Raider SE >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Systems >> Power Seat Track >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Seat Track: Installation

  1. Position the power seat track assembly on the seat cushion frame and compare the old and replacement seat tracks to be certain the correct part is available.
  2. If the vehicle is equipped with a split bench seat, Install the fasteners that secure the center seat cushion section to the brackets on the power seat track assembly.
  3. Install the four bolts that secure the power seat track assembly to the seat cushion frame. Torque the bolts to 27 N.m (20 ft. lbs.).
  4. Install the power seat wire harness retainers on the seat track assembly.
  5. Connect the power seat wire harness connectors.
  6. Install the driver side seat assembly in the vehicle.

    (Refer to INTERIOR/SEAT - FRONT/INSTALLATION ) for the procedure.

  7. Connect the battery negative cable.
scientia non olet · About LEMON Manuals