Remote Keyless Entry Transmitter Batteries

The Remote Keyless Entry (RKE) transmitter case snaps open and shut for battery access. To replace the RKE transmitter batteries: 

1. Using a trim stick or a thin coin, gently pry at the notch in the center seam of the RKE transmitter case halves until the two halves unsnap.
2. Lift the back half of the transmitter case off of the RKE transmitter.
3. Remove the two batteries from the RKE transmitter.
4. Replace the battery with a new CR2032. Be certain that the battery is installed with the polarity correctly oriented.
5. Align the two RKE transmitter case halves with each other, and squeeze them firmly and evenly together using hand pressure until they snap back into place.