LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Raider SE >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Systems >> Switch - Seat - Driver >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Switch - Seat - Driver: Installation

Fig 1: Identifying Seat Cushion Side Shield, Power Seat Switch And Screws
G04859252Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. Install the two screws (3) that secure the power seat switch (2) to the inside of the seat cushion side shield (1).
  2. Install the wire harness connector on the power seat switch assembly.
    Fig 2: Identifying Power Seat Switch Assembly, Front Seat Cushion Side Shield, Screws And Recliner Lever
    G04859251Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. position the seat cushion side shield (2) and power seat switch assembly (1) onto the seat frame.
  4. Install the seat cushion side shield screws (3) and (6).
  5. Install the recliner lever (5) on the recliner mechanism release shaft.
  6. Install the screw (4) that secures the recliner lever (5) to the recliner mechanism release shaft on the outboard side of the driver side front seat.
  7. Connect the battery negative cable.
scientia non olet · About LEMON Manuals