LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2008 >> Eclipse GS, Automatic >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2007 GALANT 2.4L, Outlander >> Pattern 8 >> Test Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Drive the vehicle at more than 50 km/h (31 mph) for 1 minute.
  3. Stop at safe place and let the engine idle for 30 seconds.
  4. Repeat Steps 2 and 3 for 4 times.
  5. Stop the safe place and turn the ignition switch to "LOCK" (OFF) position.
  6. Start the engine and do Steps 1 to 5 again.
  7. Confirm that the diagnostic trouble code (DTC) is not output.