Data List Reference Table
The following items can be read by the scan tool from the TCL/ASC-ECU input data.
DATA LIST REFERENCE
| M.U.T.-III SCAN TOOL DISPLAY | ITEM NO. | CHECK ITEM | CHECKING REQUIREMENTS | NORMAL VALUE |
|---|---|---|---|---|
| FL wheel speed sensor | 01 | Front-left wheel speed sensor | Drive the vehicle | Vehicle speeds displayed on the speedometer and scan tool are identical. |
| FR wheel speed sensor | 02 | Front-right wheel speed sensor | ||
| RL wheel speed sensor | 03 | Rear-left wheel speed sensor | ||
| RR wheel speed sensor | 04 | Rear-right wheel speed sensor | ||
| Power supply voltage | 05 | TCL/ASC-ECU power supply voltage | Ignition switch power supply voltage and valve monitor voltage | Battery positive voltage |
| Stoplight switch (input) | 06 | Stoplight switch | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| Lateral G sensor | 08 | Lateral G | -4 to 4 G | |
| Master cylinder pressure | 10 | Master cylinder pressure | The value fluctuates significantly as the brake pedal is depressed. | -30 to 230 bar |
| Steering angle | 11 | Steering angle | -900 to 900 deg | |
| Yaw rate sensor | 12 | Yaw rate | -80 to 80 deg/s | |
| ASC off switch | 28 | ASC mode | ASC OFF switch: ON | OFF |
| ASC OFF switch: OFF | ON | |||
| Master cylinder pressure offset | 47 | Master cylinder pressure | The value fluctuates significantly as the brake pedal is depressed. | -30 to 230 bar |
| Lateral G sensor offset | 49 | Lateral G | -4 to 4 G | |
| Steering angle offset | 50 | Steering angle | -130 to 130 deg | |