Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) | |
| With engine stopped | 10 (0.4) or less | - | ||
| Steering angle | Inside wheel | 35°36' +/- 2° | - | |
| Outside wheel (reference) | 30°00' | - | ||
| Toe-in mm (in) | 0 +/- 3 (0 +/- 0.12) | - | ||
| Tie rod end ball joint breakaway torque N.m (in-lb) | 0.5-2.5 (4.4-22.1) | - | ||
| Tie rod swing resistance N (lb) [Tie rod swing torque N.m (in-lb)] | 3.5-17.3 (0.8-3.8)[1.0-4.9 (8.8-43.4)] | - | ||
| Engine idle speed r/min | 680 +/- 100 | - | ||
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 30 (6.7) or less [5.9 (1.33) or less] |
- | ||
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 9.3-9.8 (1,349-1,421) | - | |
| Pressure under no-load conditions | 0.8-1.0 (116-145) | - | ||
| Steering gear retention hydraulic pressure | 9.3-9.8 (1,349-1,421) | - | ||
| Oil pressure switch operating pressure MPa (psi) | OFF --> ON | 1.8-2.4 (261-348) | - | |
| ON --> OFF | 0.8-2.4 (116-348) | - | ||
| Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | 0.8-1.9 (7.1-16.8) [0.7 (6.2) or less] |
- | ||
| Opening dimension of special tool MB991561 mm (in) | 2.9 (0.11) | - | ||
| Band crimped width mm (in) | 2.4-2.8 (0.09-0.11) | - | ||